With the development of the synthetic materials industry, a large number of synthetic resins have been used in fields such as construction, transportation, electrical appliances, aviation, and daily necessities. Due to the flammability of organic resin compounds, people have gradually put forward increasingly urgent requirements for the flame retardancy of materials. The purpose of using flame retardants is to make combustible materials flame-retardant materials, that is, to burn slowly when in contact with a fire source, and to quickly stop burning and extinguish when leaving the fire source. It should be said that the synthesis of heat-resistant materials with high oxygen stability can also be considered in reducing the flammability of polymers, but such polymer materials often have high costs and are difficult to meet other requirements. Therefore, adding flame retardants is a practical and economically feasible method There are two classification methods for flame retardants.
Classified by composition as follows:
Additive flame retardants mainly include phosphate esters, halogenated lamps, and oxide coatings. They are simply mixed with polymers and do not undergo chemical reactions. Reactive flame retardants are used as raw materials in polymer preparation and become part of polymer molecules through chemical reactions. Therefore, they have little impact on the performance of plastics and have long-lasting flame retardancy. They mainly include halogenated acids and phosphorus containing polyols.
The basic requirements for flame retardants are as follows:
(1) Flame retardants do not reduce the physical and mechanical properties of polymers, that is, after flame retardant processing, the original physical and mechanical properties of plastics are not deteriorated, especially without reducing deformation temperature, mechanical strength, and electrical characteristics;
(2) The decomposition temperature of flame retardants must be adapted to the thermal decomposition temperature of polymers to achieve flame retardant effects. Halogen free flame retardants should not decompose during plastic processing and molding to prevent the gas generated by decomposition from polluting the operating environment and causing discoloration of the finished product;
(3) Has durability, and its flame retardant effect cannot disappear during the use of the material;
(4) Has weather resistance;
(5) Low price is becoming increasingly important as the amount of flame retardants added to products tends to increase
Since the 1970s, with the widespread use of plastics in various sectors And many countries have increasingly strict requirements for the combustibility of plastic materials, so flame retardants have developed rapidly and are the fastest growing type of plastic additives. At present, the production and consumption of flame retardants have reached a considerable scale, and research work is also very active The United States is a major producer and consumer of flame retardants, second only to plasticizers in terms of consumption, and ranks second in the category of whole material additives. Currently, the main consumers of flame retardants are polyethylene oxide, polyethylene terephthalate, unsaturated polyester, and polystyrene. The proportion of flame-retardant plastics is the largest and the fastest growing is polyurethane fish foam plastics.

